Applications
For hand held or medium production deburring operations, the Handi-Burr tool is recommended. The tool deburrs automatically -- front and back side or back side only -- in a single pass. A sturdy tool with only a few parts, the Handi-Burr does not require special handling or adjustment. No special operator skill is needed, and the tool can be used in either a fixed spindle machine or a portable power hand tool. The amount of de-burring and chamfer can be controlled by adjusting the setscrew in the shank. The setting selected is based on the hardness of the material and the speed and feed used.

Blade Type
As shown, DA (double action) for deburring both sides of holes and BA (back action) for back of hole only. Tungsten Carbide blades available in 5/32 to #110 sizes by special order.

Removing or Replacing Blades
For blade replacement or sharpening, simply remove blade by sufficiently loosening the setscrew in the shank end. The blade has an open-end slot design. Slip open end of slot over pivot pin and adjust setscrew to desired depth of cut. Do not compress spring to its solid condition. The blade will not retract without spring cushion.

Handi-Burr Standard Sizing Charts